GreenCasaMaryland

For the on-site produced cabinets, GCM used PureBond Hardwood Plywood that is Formaldehyde-Free, environmentally safe, and contributes toward LEED IEQ Credit 4.4 for low-emitting materials. The lumber comes from Columbia Forest Products, a leader in sustainable forestry, and is FSC certified. More Info: http://purebondplywood.com/product/purebond-plywood/

For the on-site produced cabinets, GCM used PureBond Hardwood Plywood that is Formaldehyde-Free, environmentally safe, and contributes toward LEED IEQ Credit 4.4 for low-emitting materials. The lumber comes from Columbia Forest Products, a leader in sustainable forestry, and is FSC certified. More Info: http://purebondplywood.com/product/purebond-plywood/

GCM used leftover construction material from the building of the house to build an External Structure to store the small amounts of cans of chemicals that might contain VOCs or other unhealthy fumes, as opposed to storing them in an internal garage or basement where the fumes will circulate in the house and lower air health quality, and lower LEED points.

MISC LEED STUFF


In this section you will find miscellaneous stuff GCM is doing to achieve LEED points.

Close-up detail of the layers of solid and spray foam insulation installed prior to fiberglass insulation:

(See Pictures 8 and Pictures 9 pages for High Resolution pictures)

9) The Gypsum Boards (or "drywall") were chosen for VOC absorption, water and mold resistance, and sound dampening. GCM went with the Certainteed line of sustainable construction products. Click on the various pictures below to find out more information on each gypsum board. On the walls "AirRenew" gypsum boards will absorb unhealthy vapors such as formaldehyde, Easi-Lite for the ceilings, M2TECH around areas exposed to moisture, and finally SilentFX gypsum board for sound dampening for the basement TV/Music room, which all adds up to a better environment and more LEED points.

4) The attic and crawlspaces will be insulated with many materials and layers, such as Certainteed's R19 fiberglass insulation, which is Indoor Air Quality Association certified, is Energy Star certified, GreenGuard.org certified, and NAIMA certified. Certainteed's R19 is made from recycled and recyclable content, no formaldehyde is added, and also helps reduce noise. Also, GCM has a double layer of solid foam insulation, as well as spray foam for any cracks or gaps. All of this will help us achieve maximum LEED points. 

7) The walls are super insulated, and foam was used to seal all the cracks. We REUSED leftover pieces of Insulated Concrete Forms to insulate the walls also, along with donated insulation from GreenGuard.

3) Metal drip edges were installed to channel water away from the structure, and every detail was seen to assure construction was of the highest quality.

1) We designed the roof to last and be warranted well over 25 years.

2) For the underlayment we installed InterWrap Titanium UDL-30 which greatly exceeds the properties of conventional felt and is warranted for 40 years. It is made from 20% recycled materials and helps contribute greatly towards our LEED points.

2) Special care was taken to select an Energy Star Efficient roofing tile. One of the main ways one can reduce the temperature of a house is to reflect the sun's rays instead of absorbing them. GCM went with a roofing tile that reflects up to 40% of the sun's rays, thereby reducing the need to consume energy and cool the house down in summer. These Landmark Solaris Platinum shingles have granules that can reduce the temperature of the roof by as much as 20 degrees. Read more about these shingles in our Energy Star Efficiency section. We also installed strips to divert water away from valleys.

8) The overhang was designed to be well over 10 inches to deflect water away from the walls. This also prevents solar degradation of the walls and helps lower temperatures, thereby reducing the need to operate the heat pump and/or air conditioning unit.

ROOFING

Roofing plays a crucial role in meeting LEED certification. We designed the roofing carefully to help us achieve LEED Certification.

6) Tyvex Thermawrap R 5.0 insulating Housewrap was installed for maximum insulation. Step & Kickout Flashing was done around dormer, and rain and ice shields were installed at all valleys and intersections of walls and roof.

5) We assured water drainage away from interior of walls at edges, and put water channels to drain water away from windows.

4) We sloped the deck and porch away from the house, allowing for natural drying of the assembly. We also attached deck ledger boards to the structure without disrupting the drainage plane. We used an E3-rated "Green" Defy wood stain and used western red cedar wood for the deck flooring and siding, a more sustainable wood.

3) We fully "flashed" all door and window openings, and other areas. This provides maximum water diversion, and will prevent water degradation.

2) We thoroughly sealed the spaces between the doors, windows and all penetrations with a non-toxic foam, maximizing insulation and therefore requiring less energy to cool and heat the house.

Title

Subtitle

Type your paragraph here.

WALLS

All construction had the proper detailing to prevent degradation to moisture


1) Doors and Windows - LEED certification requires windows and doors that are super insulated. GCM went with Intus Windows windows and doors which are "bank vault thick", and are one of the most insulated and energy-efficient windows and door systems out there. They exceed the 10-year warranty requirement, and they will withstand strong winds. To find out more info on these energy-saving doors and windows, check out IntusWindows.com. http://www.intuswindows.com/

7) We used "Helix Fiber Rebar" to set concrete and for reinforcement, a "green" concrete additive. GCM also used many other "green" products throughout the project.

8) To deal with Interstatial Condensation, we "re-used" pieces of insulation to super insulate the cold water main coming in, and laid down gravel under the water main out for proper drainage. We assured the dryer vented outside, and we then installed corrosion-proof anti-rodent screens.

6) We used BuildBlocks forms and concrete walls, so we use less trees, which is a more sustainable method. They will also handle storms well and will last for decades.

5) We backfilled the foundation with loose, porous material assuring proper water drainage.

2) We installed insulation at edge of footers forming a vapor seal, retarding water seepage.

3) We then laid down gravel for good drainage around footers. We installed ozone-friendly insulation to thermally isolate the slab. We then covered that with plastic sheeting for a vapor seal between the footers and slab. Finally, we sealed all penetrations into the slab. A radon vent pipe was installed.

4) We had the foundation sprayed with a non-toxic sealant below the soil, and then we installed E-Pro ECODRAIN-E membrane which diverts water away from the foundation, sealing all edges watertight. We then finished installing the footer drainage pipes assuring proper water drainage around foundation.

What are we doing to get LEED Certified?


Below you will find various things GCM is doing to qualify for being LEED Certified and a brief explanation why.

FOUNDATION

1) We tamped the soil down below footers well, and installed drainage pipes to assure proper drainage around footers. Proper water drainage is a must in LEED certification.

What is LEED certification?


GreenCasaMaryland is Silver LEED Certified!


LEED stands for "Leadership in Energy and Environmental Design", and are standards the EPA has made to promote green and sustainable design in building construction. GreenCasaMaryland is committed to achieving LEED Certification in the construction of our model home. Watch this video below that explains what LEED certification is, and check back for articles on specific things we have done to help us achieve our goal of LEED Certification.